Waste Tire Recycling Rubber powEPTproduct tyre recycling shredder
The EPT tire recycling EPT will be controlled by the PLC, all the components will be process inside of of EPTs, there is Genuine ZERO Air pollution. one labor, one engineer can operate all the EPTs, no need to have to function the EPTs, just control the PLC. the EPTs can safeguard the EPTs, work the EPTs and maintain the EPTs perform smoothly.
Specification
one.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC automated management method, with automated reversal handle system in overload problem. Two-shaft tire crusher is EPTly designed for outdated tires with low velocity and high torque to lessen sounds and EPT intake.
The blade of the shredEPTis made of high top quality metal and subjected to Bodycote heat therapy to achieve the greatest crushing efficiency.The shredEPTis effortless to disassemble and change cutter blade and suitable for tearing big, further thick and difficult supplies.The thickness variety of the crushing blade is 25mm-152mm in accordance to the tire type,output and final product. The grinEPTcan process OTR tires,large truck tires,car tires and so on at the speed of one-30tons whithin one hour.
Design | Enter dimension | Output dimensions | Cappacity | Motor | Blades quantity | Dimensions | Bodyweight |
TS-800 | 800mm | 50*50mm | one-2T/h | two*22kw | 16pcs | four*two.six*3.2m | 8T |
TS-1200 | 1200mm | sixty*60mm | three-5T/h | two*37kw | 20pcs | four.8*2.8*3.5m | 14T |
TS-1600 | 1600mm | fifty-150mm | 6-8T/h | two*45kw | sixteen-30pcs | 5*two*three.4m | 18T |
TS-1800 | 1800mm | fifty-150mm | 7-10T/h | 2*55kw | 20-24pcs | five.six*2*3.4m | 23T |
TS-2000 | 2000mm | seventy five-200mm | 10-15T/h | two*75kw | 20-30pcs | six*2.four*4m | 36T |
TS-2400 | 2400mm | one hundred-200mm | 20-30T/h | two*110kw | 16-24pcs | seven.4*3.2*five.2m | 56T |
2.Rasper
EPT tire shredding program is designed to generate up to six tons per hour of wire cost-free rubber mulch.This method generates up to a ninety nine% wire cost-free chip ranging in dimension among twelve-25mm depending on the sought after size.Following processing,the metal is taken out by our magnetic separation program.At this point,the wire cost-free rubber chips are prepared to be colored and employed for landscaping mulch and the steel is completely ready to be baled and marketed to smelters.
Rasper | Motor | EPT | Potential | Dimensions | Fat | Cutting chamber | Last solution |
R45 | Siemens | 45KW | three hundred-500kg/H | 1.four*1.2*two.3m | 1700kg | 450*600mm | ten-30mm |
R55 | Siemens | 55KW | 500-700kg/H | 1.7*1.seven*2.3m | 1850kg | 450*800mm | 10-30mm |
R75 | Siemens | 75KW | seven hundred-1T/H | two*two*4.1m | 3500kg | 550*800mm | ten-30mm |
R90 | Siemens | 90KW | one-one.5T/H | two.one*2.one*4.1m | 4200kg | 550*1000mm | 10-30mm |
R132 | Siemens | 132KW | 1.five-3T/H | 2*two.five*4.1m | 6100kg | 742*1200mm | ten-30mm |
R315 | Siemens | 315KW | 3-6T/H | six.2*2.1*3.6m | 12400kg | 697*1562mm | 10-30mm |
three.Granulator EPT
Waste Tire Recycling Rubber Granule Making EPT is adopting physical recycling strategy and is made to grind the rubber mulch from the rasper into small granules as fantastic as 1-6mm. The granules are screened and re-circulated until finally the desired measurement is attained. This Fully-Automated Tyre Recycling Line managing in normal temperature, no need to have to insert any other chemicals, no pollution to the atmosphere. This is the best way to recycling scrap tires.
Granulator | G37 | G45 | G90 |
Motor | Siemens | Siemens | Siemens |
EPT | 37kw | 45kw | 90kw |
Potential | 300-500kg/h | five hundred-800kg/h | 800-1500kg/h |
Proportions | one.8*1.6*2.4m | 1.8*one.nine*2.4m | 2.2*two.three*3m |
Final merchandise | one-6mm | one-6mm | one-6mm |
4.Miller
Rubber powEPTis the closing end result of ambient tire recycling.At this phase,crumb rubber is floor down into a clear powEPTform with nearly all steel and fiber eliminated.Rubber powEPThas quite a few secondary makes use of from injection molding goods,coatings,roofing resources and various asphaltapplications.
Rubber powEPTis usually located in 40-seventy four microns(.40-.74mm) in dimensions.This micron dimension metarial has the benefit of becoming integrated into new or eXiHu (West Lake) Dis.sting formulations for numerous polymers and concluded goods.
Rubber powder | M2000 | M1500 | M1000 | M500 |
Enter item | Hefty duty truck tyres to bicycle tyres | |||
Input size | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
Output measurement | shred to thirty-a hundred and twenty mesh rubber powder | |||
Ability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
Overall Kw | 680-760kw | 516-556kw | 347-372kw | 170-190kw |
Mob 151366 0571 6
FAQ:
Q1,Are you a factory or a investing business?
A. We are a maker with 30 many years production experience in tire recycling EPT. We have export license, we can provide you the factory rates.
Q2. Can you assure the capacity as you pointed out ?
A. Absolutely sure,besides that,we also offer three-5years guarantee.
Q3, are you certain the ultimate rubber powEPTcan be fully thoroughly clean out of wire metal or nylon ?
A. The final powEPTpurity can attain 99.nine%. we have magnetic separator which can independent the wire steel from the rubber powder.