I often receive consultation on plain exclusive and beautiful picture. Basic wallpapers because there is no Pure paper Wall covering pattern, therefore more likely to appear seam issue, then, in the actual process we should handle it? If the simple picture shows up to show the sensation of seam, the first thing to judge the cause for its seam is what can consider the correct treatment. 01 The problem of slit The wallpaper offers no color difference, but the front side 1.5 meters can find the seam. Please recognition whether the joint can be significant when the structure is dealt with. Many of the factors for the seams are triggered by the construction problems. [treatment] If the wallpapers is certainly a PVC wallpaper, you can make use of a moist hand towel to clean the damp seam, switch the wallpapers glue, lightly lift the wallpapers, and then soften the wallpaper with the wallpaper softener, therefore it is convenient to stretch the wallpapers to restoration the bones. If it is normally pure paper wallpaper, nearly no extensibility, so can not end up being used to restoration the above technique, can be utilized with wall paper color tones to cover the bottom color. Two male and female If there can be no feeling of integrity between the wallpapers strips on the entrance 1.5 meters, the wall paper bones are handled well; the wallpapers appears like a color difference, and the color difference between the bones can be centered on the apparent regulation of deep low deep short or low deep low depth: it could be caused by the Yin and Yang surface. Discover the label of this picture to find if there is an switching paste icon on it. (a downward arrow with an up arrow) [treatment] There are up and down alternately paste icons, based on the need for alternative pasting logo design: shallow – shallow – deep – deep relative, you can avoid the phenomenon of Yin and Yang. Three Light advantage If the dark wallpapers can be found out to become somewhat much longer than the bottom paper, there will become white edges at the joint parts after the building, and splits can become obviously noticed at the front 1.5 meters away from the wall. [treatment] (1) because it is basic coloured picture, the picture without building can end up being treated by a boundary slicing technique. (2) if the wall paper offers been finished, it can be used to cover the background with the same color paint as the picture. Four Spilled rubber Ordinary colored picture is normally not really simple to erase after overflow, and there are residual records after massaging. As a result, be cautious when dealing with overflow glue, try not to leave remnants. Color picture interest points: 1, in the construction of the wall paper brands must become checked whether there is usually “switching up and down” construction logo, if there should become positive and bad paste, if the positive and detrimental paste after the sensation of yin and yang can end up being attempted once again. 2, the structure of basic nonwoven wallpaper should avoid glue and clean as significantly as feasible. Once wiping is normally performed, it will keep remnants. If it is certainly overflowed, remove the spilled glue in a minimum area. The dark colored wallpaper should be soft. 3, PVC plain wallpaper, the initial three picture pasted fifty percent an hour after we must pay interest to check whether the bones of the wallpapers are stitched with counter, and the balance can be that the PVC picture can not end up being leaking.