We often have these and other complications when we put up our wallpapers. Especially the friend that a lot of need to stay wallpapers of oneself begin work, it is certainly to follow one’s inclinations even more, discovered to stay finally only generally experienced a few small blemish.

In fact, as long as construction attention, these problems can be avoided. Today, let’s pick out out all these complications and focus on solving them!

Basal membrane peeling

1) before brushing the bottom film, check whether the wall structure is standard, no powdering and no floating coating.
2) whether there are small splits in the wall.
3) whether the construction temperature is over 5 degrees.
4) if the initial brush is too heavy, brush the second one before drying. The drying time of the internal and external layers may cause peeling.
5) whether the bottom film is too dense, water may be added for alleviation. Brush the foundation film again after sanding with sandpaper.

The treatment of substrate film has great influence on the wallpaper effect, and the most immediate effect is on the stability of the wallpaper. Therefore, the substrate membrane must end up being treated according to the requirements of the instructions and combined with the actual circumstance.

The glue overflow

Glue overflow is a very common sensation in the process of pasting wallpapers, in the structure process, we should try our best to avoid the overflow of glue through paper record, the paper wallpaper is relatively simple to clean, can not use paper tape, all the wallpaper various other than the paper recording suggested to use paper record building.

1) clean with a damp cloth or sponge, ideal for scrubbing wallpaper.
2) absorbent with dry out bath towel, ideal for wallpapers whose surface area can not end up being touched with water.
3) absorbent with a wet cloth or sponge, suitable for wall papers with granular surface.

Blot at base joint

The treatment of wallpaper joint is the key link of wallpaper construction all the time, a lot of professional construction experts have their own tricks. For the layman, in the structure of particular attention. When staying wallpaper, glue do not come out completely, accumulate at juncture, period is usually longer glue and wallpapers rise reaction.

Answer: take a little bottle of 60-80 degree boiled drinking water and increase a bottle of white colored vinegar to it all. When the water cools, wash it at the joint. (local test is normally recommended) the wallpaper will be even more effective in 1-2 weeks, and 80% remnants can be eliminated.

The wallpaper shrinks and warps

Wallpapers contraction sensation is mainly the workers in the structure of loose joint parts, resulting in a later on period of this problem, and workers with the building technology. Because picture is normally made by solid wood pulp, have the quality of lumber damp bilge dried out shrink, performance is normally not especially steady, after heading up glue liquefied can have certain dilatancy, create systole in drying process. Although the growth can not Silk Wallcovering really become managed, employees can control the contraction during structure.

Most wallpaper contractions are undetectable, unless the seams are insufficient. In this case, it is generally feasible to source overlapping parts at bones. Generally, 1-3 cm of overlapping parts at joint parts are better.

If you have already contracted, the repair process is relatively simple. Saturate the joint for 10 moments with a wet hand towel and pick up the wallpaper with the suggestion of the wallpaper knife. If the connection of the wallpapers surface is normally metallic surface area, scraping quickly makes the picture surface area drop shine and turn black, harm the wallpaper surface area gorgeous, it is usually not really recommended to operate.

The wallpaper moldy

1) the wallpapers is moldy and usually offers spots on the wallpaper surface area.
(1) water seepage should be checked.
(2) whether the glue is usually completely dry.
(3) whether there is certainly drinking water and surroundings in the picture for a long time, which will trigger mildew when it all reacts with glue.
(4) high humidity.
(5) wet wallpaper paste.

Mold of wallpapers is the issue that the person that stays picture concerns, also be to appear after resolve difficulty coefficient one of the biggest complications, accordingly, this sort of problem, wish with prevent provide priority to. It is best to prevent moist and damp function in progress.

So, after wallpaper appears this type of issue, do not really possess option? Of course not really.

2) treatment method
(1) the mildew stage is little. It is usually suggested to wipe it with fertilizer or detergent and dry it with a hair clothes dryer.
(2) with bleach, it is definitely simple to irritate the skin and may cause the wallpapers to lose color. It is normally not really recommended to use.
(3) if the mildew point is huge, the picture should be replaced. If the water seepage is caused by the wall structure, this problem should end up being resolved thoroughly before Posting.