PU Foam Sealant Adhesive PU Foam Spray

Adhesive is crucial assistant substance of anti-theft door, steel wooden doors, polymer doors, which refers to make contact with with air curing one component adhesive. With the attributes of substantial bonding power, great weathering resistance, easy to use, drinking water resistance and so on, it is widely utilized in iron and steel, galvanized metal plate, wood structure and etc.

Software Desc.:

Honeycomb paper (incXiHu (West Lake) Dis.Hu (West Lake) Dis. aluminum honeycomb paper, polymer honeycomb paper, and many others.) EPT foam glue. Utilized in want filling device bonding honeycomb paper and other paper goods.

Used for bonding fireproof board, honeycomb paper in gadgets such as protection doors, and so forth..

Bonding polystyrene foam board for use in units such as safety doorways, and so forth.


1. Strong adhesion, shear, large peel toughness, high and low temperature resistance, hydrolysis resistance , heat resistance and aging resistance.

two. It can accomplish ideal physical efficiency right after curing at area temperature and no degumming phenomenon in the method of transfer printing of protection doorway.

3. The operational time adjustment is strong, it can be chosen in accordance to the different time and diverse curing approach of Styrofoam.

4. Reduced toXiHu (West Lake) Dis.metropolis solvent, with no using highly toXiHu (West Lake) Dis.c solvent to decrease expenses.

Specialized Index:

Viscosity(with four cups, 77 ordmF):100-300s

Effective substance contentL78+-3%


one)Brushing method: the surface area of the working object is pretreatment #8594brushing glue #8594agglutination #8594curing. Cleansing the adhesive floor of security doorway to make sure that no rust and no oil. It will result the adhesion of Styrofoam if this element not be good dealt with.

2)In orEPTto ensure the power of the adhesive, place the adhesive evenly coated scratch in the sticky area. It truly is better to scrape with plastic toothed blade scraper, it can not use hairbrush brush glue due to the fact of high viscosity. The dosage of glue can be confirmed by the embossed depth of door. Brushing ought to not be way too thick, uncovered time not too EPT.

3)Spend interest to velocity the approach of gluing, coating evenly. It demand rapidly velocity in summer, not brush again and forth a lot of times. If the action is sluggish, you can place force in the glue EPT, do not wait for the floor glue has dried and then put stress on. Agglutination can be managed by chilly pier or scorching pier, the least time of chilly pier is three-four hrs and the minimum time of hot pier is 15-30 minutes. The cement time above ten hours, it is greater that the backing temperature is 190 ~ 220C deg.

four)You should seal use lid for the unused glue to keep away from curing crust. The thoroughly clean of resources can use ethyl acetate solvent, or it can be soaked in warm drinking water for a number of minutes, and then wash with cleaning soap. This item must be saved in a dry, ventilated, sealed atmosphere, make sure you do not contact the h2o.


In the two process of brushing glue and strain on glue, it should be completed in the floor drying time that usually significantly less than 20 minutes .

EPT amp Shipping and delivery:

EPT Details 200kg/drum, 80 drums for a 20” container.
Shipping Time fifteen daEPTafter get

About us:
HangZhou XiHu (West Lake) Dis.hu (West Lake) Dis. Chemical Co., Ltd. is 1 of the biggest adhesive producers in China, EPTizes in the investigation, manufacture and marketing and advertising of various kinds of adhesives, incEPTd: Drinking water-Based mostly Homo-Polyvinyl Acetate Emulsion Adhesive, Polyurethane adhesive, spray adhesive, make contact with adhesive, footwear adhesive, wallpaper glue, and so on. OEM is obtainable listed here.

PU Foam Sealant Adhesive PU Foam Spray

PU Foam Sealant Adhesive PU Foam Spray