Adhesive is important assistant materials of anti-theft doorway, metal wooden doorways, polymer doors, which refers to get in touch with with air curing solitary part adhesive. With the attributes of substantial bonding energy, very good weathering resistance, effortless to use, water resistance and so on, it is broadly employed in iron and metal, galvanized metal plate, wood structure and and many others.
Honeycomb paper (incXiHu (West Lake) Dis.Hu (West Lake) Dis. aluminum honeycomb paper, polymer honeycomb paper, and many others.) EPT foam glue. Utilized in want filling unit bonding honeycomb paper and other paper products.
Used for bonding fireproof board, honeycomb paper in devices such as stability doors, and many others..
Bonding polystyrene foam board for use in products these kinds of as protection doors, etc.
one. Powerful adhesion, shear, high peel energy, large and minimal temperature resistance, hydrolysis resistance , heat resistance and ageing resistance.
two. It can obtain best bodily performance soon after curing at area temperature and no degumming phenomenon in the procedure of transfer printing of security door.
three. The operational time adjustment is strong, it can be picked according to the various time and different curing method of Styrofoam.
4. Low toXiHu (West Lake) Dis.town solvent, with no utilizing highly toXiHu (West Lake) Dis.c solvent to reduce expenses.
Viscosity(with 4 cups, seventy seven ordmF):100-300s
Powerful substance contentL78+-three%
one)Brushing process: the floor of the operating object is pretreatment #8594brushing glue #8594agglutination #8594curing. Cleaning the adhesive surface of security door to ensure that no rust and no oil. It will effect the adhesion of Styrofoam if this part not be good taken care of.
2)In orEPTto ensure the power of the adhesive, location the adhesive evenly coated scratch in the sticky area. It truly is better to scrape with plastic toothed blade scraper, it can not use hairbrush brush glue since of large viscosity. The dosage of glue can be verified by the embossed depth of doorway. Brushing must not be as well thick, exposed time not also EPT.
three)Shell out attention to pace the approach of gluing, coating evenly. It need rapidly speed in summertime, not brush back again and forth several times. If the motion is gradual, you can set strain in the glue EPT, do not wait for the area glue has dried and then set strain on. Agglutination can be taken care of by chilly pier or hot pier, the minimum time of chilly pier is three-4 hours and the minimal time of hot pier is fifteen-thirty minutes. The cement time in excess of ten hrs, it is far better that the backing temperature is one hundred ninety ~ 220C deg.
4)Remember to seal use lid for the unused glue to avoid curing crust. The clean of tools can use ethyl acetate solvent, or it can be soaked in warm water for a few minutes, and then wash with soap. This item need to be saved in a dry, ventilated, sealed atmosphere, please do not touch the drinking water.
In the two method of brushing glue and strain on glue, it have to be concluded in the floor drying time that normally considerably less than 20 minutes .
EPT amp Delivery:
|200kg/drum, 80 drums for a 20” container.
|15 daEPTafter get
HangZhou XiHu (West Lake) Dis.hu (West Lake) Dis. Chemical Co., Ltd. is 1 of the largest adhesive manufacturers in China, EPTizes in the research, manufacture and advertising of distinct sorts of adhesives, incEPTd: Drinking water-Based Homo-Polyvinyl Acetate Emulsion Adhesive, Polyurethane adhesive, spray adhesive, contact adhesive, footwear adhesive, wallpaper glue, and so on. OEM is accessible listed here.