Sticky Sublimation Coating Powder
Sticky sublimation coating powEPTis particularly designed and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for the elastic cloth transfer printing, to avert the overlap of the pattern, deformation and other troubles of elastic cloth in the procedure of transfer, ensuing in a quite minimal move charge of transfer printing
Attribute:
one.During the transferring , the sticky coating powEPTcould be in a position to adhere the fabric and paper, but there is no glue residue on the cloth right after stripping
2.The stickiness of the cloth and paper can be modified by the company of the transfer paper unEPTthe advice of our organization and the viscosity is more secure, which can be stored for a EPT time.
Higher Concentration Sublimation Coating Powder
For the existing higher-pace coating EPTs, our firm independently deveXiHu (West Lake) Dis.Hu (West Lake) Dis.s a strong content of far more than thirty% of the coating chemical-high concentration coating powder. On the basis of no escalating in fees, the coating speed could be signnificantly improved, and creation potential will be doubled than the fast-dry coating powders.
Characteristic:
For high-pace coating EPT manufacturing, coating producer need to have a experienced coating technology.
Rapidly-dry Sublimation Coating Powder
The formulation of the 1st technology of EPT sublimation transfer paper coating is commonly utilised in the marketplace, but steadily it cann’t be matched with the prerequisite of high-speed printer thanks to the large cost, reduced manufacturing efficiency and gradual drying of printing coating.
Attribute:
Nano-induced secondary self-assembly techniques of this coating content , are drastically enhanced in the subsequent facets:
one.The general price of this quick-dry combined powEPTis diminished whilst the usability of the powEPTremains unchanged
two.This quick-dry coating powEPTcan enhance the effectiveness of coating manufacturing, and the generation pace can be promoted by far more than 25%
three.Thanks to purposeful enhancement, the printing drying price of this product has been enhanced much more than one particular time, and it can save huge volume of electrical powEPTfrom the baking lamp.
How to use our coating powder:
one.Including proportional h2o into stirring tank, hold h2o temperature as very same as area temperature.
two.Put EPT bag coating powEPTslowly into agitator even though stirring, and keep stirring until finally the chemical powEPTdissolving uniformly into water, no lump on the floor of liquid. The dissolution time is dependent on the strategy of agitator.
three.EPTking some samples of undertaking tests after dissolving, and just take notes of glue temperature and corresponding viscosity, ensure the qualified testing end result before filtration.
4.Two occasions of filtration prior to coating on EPT with 800-100mesh filter
5.The liquid glue continue being on EPT is recyclable whilst coating. It need to be through filter monitor again and can be utilized in miXiHu (West Lake) Dis.ng with new liquid coating substances.
JoinGoal EPT Material(HangZhou) Co., LTD
Cindy
Site:
