Along the way of wallpaper paving, many people believe compared with parquet wallpaper, plain wallpaper is very simple and more convenient to use without mosaic. As it happens that plain wallpapers are simple and easy to lay out because they have no patterns, however the relative stitching requirements are more stringent. Plain colors, especially darker plain colors, are relatively more prone to seam complications. If the basic wallpaper has a seam phenomenon, what is the explanation for judging the seam? Then take the correct approach.

1. There exists a gap
If the seam is seen at 1.5m on leading side, there is absolutely no color difference in the wallpaper. Could it be serious to handle the seams during Vinyl Wall covering structure? Most of the factors behind the seams are due to construction problems.
1. If the wallpaper is normally a rubberized wallpaper, you can wet the seam with a wet towel, open the wallpaper glue, carefully pry open up the wallpaper, and then utilize the wallpaper softener to soften the wallpaper to extend the wallpaper and fix the seams.
2. If it is a 100 % pure paper wallpaper or a non-woven wallpaper, there is almost no stretchability, so it can’t be repaired by the above method. The base can be shaded with a paint-coated seam that’s similar in color to the wallpaper.
2.Yin and Yang
If there is obviously zero overall feeling between your wallpaper strips at 1.5m on leading aspect, the seams of the wallpapers are handled well at close distances, and there is absolutely no obvious seam phenomenon. It appears that the wallpaper looks like a color difference, and the colour difference at the seam is normally in accordance with the apparent law of deep-shallow-deep-light or shallow-deep-shallow-deep, which might be due to the yin and yang.
Find the label of this wallpaper and see when there is an alternate label on the top and bottom of the label – ↑↓.

1. If there is, it requires to become alternately pasted based on the logo, ie: shallow-shallow-deep-deep relative to avoid the phenomenon of yin and yang.
2. If there is no logo design, it is caused by the product quality problem of the wallpaper. There is absolutely no solution and it is necessary to respond to the wallpaper sales workplace.

3 white side
If underneath paper is found to be slightly longer when the dark wallpaper is constructed, there will be a white edge at the seam after the construction. The gap is usually clearly visible at a distance of just one 1.5 m from the front of the wall.

1. Because the wallpaper isn’t constructed with plain wallpaper, the seam could be treated by the method of edging.
2. If the wallpaper has been constructed, it can be used in the same color as the wallpaper. (This is a versatile method)

4 overflow glue
The plain wallpaper isn’t easy to erase after filled with glue, and there are residual rubber marks after rubbing.
1. When constructing, make sure to check whether there can be an “up and down alternate” construction mark on the wallpaper label. If there is this logo design, the wallpaper should be positively and negatively posted. If there is still a negative and positive surface phenomenon, you can test normal stickers again.
2, plain color nonwoven wallpaper construction should try to avoid spilling glue, prevent wiping, once the wiping strength is normally large, it may leave traces. In case you are unfortunate enough to spill the glue, you should wipe the spilled glue in the smallest range, and the softer color of the simple wallpaper should be gentle.
3, rubber surface ordinary wallpaper, the first wallpaper paste for around 30 minutes must focus on check if the seams of the wallpaper have offset printing. If there is offset printing, it means that the rubberized wallpaper can’t overflow, and the glue will keep traces.