Along the way of wallpaper paving, many people think that weighed against parquet wallpaper, plain wallpaper is very simple and far more convenient to use without mosaic. It turns out that basic wallpapers are simple and easy to lay out because they haven’t any patterns, however the Original Wallcovering relative stitching requirements are more stringent. Plain colors, especially darker plain colors, are relatively more prone to seam complications. If the ordinary wallpaper has a seam phenomenon, what’s the reason for judging the seam? After that take the correct approach.

1. There is a gap
If the seam sometimes appears at 1.5m on the front side, there is no color difference in the wallpaper. Is it serious to cope with the seams during building? Most of the causes of the seams are due to construction problems.
1. If the wallpaper is normally a rubberized wallpaper, you can wet the seam with a wet towel, open the wallpaper glue, carefully pry open the wallpaper, and utilize the wallpaper softener to soften the wallpaper to extend the wallpaper and fix the seams.
2. If it is a natural paper wallpaper or a non-woven wallpaper, there is nearly no stretchability, so it can’t be repaired by the above technique. The base can be shaded with a paint-coated seam that is comparable in color to the wallpaper.
2.Yin and Yang
When there is obviously zero overall feeling between your wallpaper strips at 1.5m on leading aspect, the seams of the wallpapers are handled well at close distances, and there is no obvious seam phenomenon. It appears that the wallpaper looks like a color difference, and the colour difference at the seam is certainly relative to the apparent law of deep-shallow-deep-light or shallow-deep-shallow-deep, which may be due to the yin and yang.
Find the label of the wallpaper and see when there is an alternate label at the top and bottom level of the label – ↑↓.

1. If there is, it requires to become alternately pasted based on the logo, ie: shallow-shallow-deep-deep in accordance with prevent the phenomenon of yin and yang.
2. When there is no logo, it really is caused by the quality problem of the wallpaper. There is absolutely no solution and it is required to react to the wallpaper sales workplace.

3 white side
If the bottom paper is available to be slightly longer when the dark wallpaper is constructed, you will have a white advantage at the seam following the construction. The gap is normally clearly visible at a distance of just one 1.5 m from the front of the wall.

1. Because the wallpaper is not constructed with simple wallpaper, the seam could be treated by the technique of edging.
2. If the wallpaper has been built, it can be used in the same color as the wallpaper. (This is a versatile method)

4 overflow glue
The plain wallpaper is not simple to erase after filled with glue, and there are residual rubber marks after rubbing.
1. When constructing, make sure to check on whether there is an “along alternate” construction mark on the wallpaper label. If there is this logo design, the wallpaper should be positively and negatively posted. When there is still a positive and negative surface area phenomenon, you can test normal stickers again.
2, plain color nonwoven wallpaper construction should try to avoid spilling glue, prevent wiping, after the wiping strength is normally large, it may leave traces. If you are unfortunate more than enough to spill the glue, you should wipe the spilled glue in the tiniest range, and the softer color of the basic wallpaper should be gentle.
3, rubber surface ordinary wallpaper, the initial wallpaper paste for half an hour must focus on check if the seams of the wallpaper have offset printing. If there is offset printing, it implies that the rubberized wallpaper can’t overflow, and the glue will leave traces.