Computerized tire recycling EPT/tyre shredEPTEPT
Tire debeader
The 1st stage in tire recycling procession
Large obligation body
Hooks and cross pulling die made of 45# steel, tempered and quenched
Equipped with defense body avoiding the risks throughout working
Two sequence: Hydraulic a single and mechanic a single
Effortless to operate and alter spare elements (hooks and cross pulling die)
Tire cutter
Slicing tires into pieces ahead of shredding
Tiny tire items are easier to approach in shredder
Knives produced of YG-twenty steel, EPT using time
Hydraulic handle
One clamping cylinEPTand a single slicing cylinder
Equipped with a roller system to method huge tires
Tire shredder
The substantial-potential shredEPTwas EPTly deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for direct size reduction of tires into cleanly minimize tire chips, size 50×50 mm. Slicing shafts for the creation of bigger tire chips are available high torque at minimal velocity minimize even the strongest tires into pieces.
All building traits are made for steady procedure in orEPTto attain optimum throughput prices at lowest charges.
Extremely exact tolerances in between the chopping knives generate cleanly minimize tire chips at minimal power intake.
The cutting knives created of higher high quality alloy steel can be re-sharpened and reused which increases the provider daily life and minimizes the functioning costs.
The complete cutting chamber is lined with hard dress in plates.
Large doors let for effortless obtain into the reducing chamber.
Tire cracker
The shear in between the two rollers will make tire chips into powders as effectively loosen rubbers, steels and textiles
Roller body manufactured of forged steel
Area of roller manufactured of alloy metal, welded when worn out
One particular flat area roller and a single teethed roller, substantial throughput of powders
Base produced of solid iron
Crisis quit when overload
Length in between the two rollers can be modified.
Hard equipment EPT
Equipped with screening EPT, magnetic separator and fiber separator, 99% purified rubbers will be acquired.
Finals: eight-thirty mesh
Magnetic separator
Ultimate Product(five-a hundred and twenty mesh tyre powder), As image:
The same time, Tyre powEPTis broadly use in many sector. It can make rubber tile, reclaimed rubber, auto part Ect others.
two-Reclaimed rubber Producing Line From Tyre Powder:
1. Dynamic desulfurization tank (1 sets
Solution Identify
Dynamic desulfurization tank
Model requirements
two. Open miXiHu (West Lake) Dis.ng mill (you need to have two-3 sets)
one. Diameter of roller: 450mm
two. Doing work size of roller: 1200mm
3. Pace of entrance roller: 24.26m/min
4. Friction ration of two rollers: 1: 1.27
five. Max hole: 15mm
6. Potential: 25-50kgs
seven. Wieght: 2000kgs
8. Motor EPT: 55KW
nine. Dimension: 6150*2280*2000mm
3. Rubber refiner( one sets)
1. Front rolle diameter: 480mm (drum )
2. Rear roller diameter: 612mm (drum)
3. Working size of roller: 800 mm
4. Entrance roller linear pace: 22.97m/min
5. Speed ratio of 2 rollers(front/rear): one: one.eighty two
6. MAX Hole: 15mm
seven. Motor EPT: 55KW
8. Dimension: 4700*2100*1480mm
Ultimate EPT(RECLAIMED EPT):
| No | Identify | model | quantity | EPT |
| EPT tire pre-processing , you will get lt fifty*50MM rubber crumb | ||||
| 1 | One hook debeader | LS-1200 | 1 | 11 KW |
| 2 | EPT tyre cutter | WTC-120 | one | 5.5 KW |
| 3/four | EPT tyre shredder( with EPT tyre conveyor) | ZPS900 | 1 | sixty one.5 KW |
| Rubber powder processing: you will get 3-8 MM rubber powder,at the exact same time, independent the fiber and steel wire | ||||
| 5 | Tyre crusher | XK560 | one | 75 KW |
| six | Large conveyor equipment | BCL-eight | 2 | two KW |
| 7 | Tiny conveyor equipment | BCL-three | one | one.one KW |
| eight | Massive Magnet separator | BMS22 | 1 | 2.two KW |
| nine | Small Magnet separator | SMS-one | one | one.1 KW |
| 10 | Huge Shaking screen | BSS-eight | one | 7.5 KW |
| eleven | Modest Shaking screen | SSS-3 | 1 | three KW |
| twelve | Fiber separator | FS110 | 1 | eleven KW |
| thirteen | Fantastic grinder | XMF420 | 1 | 32.4 kw |
| 14 | Circle shaking display | DIA600 | one | 2.2 kw |
