EPS Cement Sandwich Panels Introduction
EPS Cement Sandwich Panel is a kind of lightweigEPT vitality saving wall material, which utilizes cement calcium silicate or bolstered calcium silicate board as experience panel, crammed with cement, ExEPTd Polystyrene (EPS) foam particles, and as core content and forming by a single time compound.
one) Composition: calcium silicate board as experience panel on the two sides, cement and EPS polystyrene sort as core.
2) Usage: This EPS cement sandwich panel can be widely utilized to all types of decoration and creating development, they are the very best materials for EPTs, flats, resorts, place of work structures and public constructions, and so forth. In addition, they are employed for compartments, EPTs, bathrooms, the inside partition walls of kitchens in the substantial-increase building and housing renovation projects.
| Title | Size (L*W*T)mm | Weight(kg) | EPT(pcs/m2 per 20′) |
|
EPS Cement |
2270*610*60 | 45-48 | 315 pcs / 436 m2 |
| 2270*610*seventy five | fifty-53 | 252 pcs / 349m2 | |
| 2270*610*ninety | 55-fifty eight | 207 pcs / 287m2 | |
| 2270*610*one hundred | 60-sixty five | 189 pcs / 262 m2 | |
| 2270*610*120 | sixty five-seventy five | 153 pcs / 212 m2 | |
| 2270*610*a hundred and fifty | eighty-ninety | 126 pcs / one hundred seventy five m2 | |
| 2270*610*one hundred eighty | 95-one hundred and five | 99 pcs / 138m2 |
Benefits:
Bodyweight: one/eight of strong brick wall
Depth : C30
Warmth conductivity : one/three of strong brick wall
Seem wave conductivity :1/four of strong brick wall
Lessen wall cost fifteen% ~ 20%
Alter the indoor humidity immediately, preserve room, reduce pollution
EPTrove development efficiency 3 times or five instances
Straightforward procedure and practical set up,
EPS Cement Wall Panels Set up Procedure
(one). Alignment, transportation of components
In the installation situation of the shell wall plate, the beam is placed vertically to make sure the installation of wall panels is aligned. A one.five sq. meter board can be carried freely by two individuals.
(two). Sawing of panels
According to the requirements of cellular EPTs with an arbitrary lower, modify the width and duration of the wall so that the threat of injury is minimized.
(3). Sizing
Employing a particular proportion of slurry and water to change into a paste, use drinking water to even up the bumps. After that, apply polymer mortar in the grooves in the wall and in the baseline of the wall.
(four). Fitting the sheet
Following transferring the mortar-protected wall panels to their respective positions, align them vertically with the baseline. Use the crowbar to make sure the wall panels are tightly equipped with one an additional.
(five). In area
Place the walls together intently so that excessive mortar can be scraped away. Ultimately, briefly correct the wall in spot.
(six). Changes
Check the changes of the wall and make the required changes.
(seven). Filling of joints
One particular working day right after the wall is set up, slurry will be used to fill in the gaps between panes.
(8). Installation of crack-resistant material
Three to five daEPTafter the joints are crammed, crack-resistant supplies will be pasted aEPT the joints.
(nine). Insertion of wires
An electric powered saw will be uEPTzed for the development of grooves in which change bins and wires can be imEPTed. Any gaps left driving can be loaded with mortar.
(1o). Plastering of paint
To end the wall, tiles might be equipped with no any scraping. Wallpaper could also be used directly onto the wall.
(11). Set up of door body
A lot of varieties of door frames can be fitted in the wall. The plywood can be secure with nails and wall anchor.
(12). Fitting of doorway and window
Preparing a door and window gap on the mounted wall, anchoraging it with splint or strains.
EPT and Shipping and delivery
1.Hold by Picket Pallet
two.Protected by PVC and Bonded with plastic belt
three.Fasten about the corners
four.Mounted in container to safeguard your acquiring.
Specification
|
Product Title |
Specification(mm) |
Weight(kg/m2) |
Authorized Tolerance(mm) |
|
Precast Concrete Sandwich Panels |
2270*610*sixty |
forty five~forty eight |
Length plusmn5 Width plusmn2 Thickness plusmn1 Diagonal plusmn2 |
|
2270*610*seventy five |
50~fifty three |
||
|
2270*610*90 |
fifty five~58 |
||
|
2210*610*one hundred |
sixty~sixty five |
||
|
2210*610*one hundred twenty |
65~seventy five |
||
|
2210*610*150 |
eighty~ninety |
||
|
2210*610*180 |
ninety five~one hundred and five |
Load containers
Certificates
