Mislabeling different batches of wallpaper in the same wall, leading to color difference is considered to be a batch of color difference;
Tip: make sure to pay attention to the wallpaper great deal number when buying and building.
Building of the use of quality not pass binders, or wallpaper on the trunk of the glue swab uneven, resulting in wallpaper appear warped edge, and mistakenly that is not able to paste;
Tip: match an excellent horse with a good saddle. Don’t allow the mere truth of experiencing a few bucks well worth of glue influence your clothing. Brand items are recommended.
During the construction, the joints were treated with scraping board, which resulted in damage of the lines upon both sides of the joints.
Tip: gentle construction.
During the construction, the wallpaper surface area is scratched hard with a scraper or a hard towel (with lots of thread ends), which leads to the inking ink or gold, silver, pearl powder and so on falling off.
Hint: when construction, strength ought to be appropriate.
During the construction, because of unwashed hands, dirty towels, and soiled wall structure materials leaking from the joint, the side look at at the joint became black, which was mistaken for the side view shadow.
Tip: preserve your construction tools clean.
During the construction, due to the excessive overflow of glue from the joint, a huge amount of clean drinking water had not been soaked with a sponge in the future, and the joint became yellow many days later on the wall upon the wallpaper, which was mistaken for quality problem.
Tip: clean the glue at the joint after construction.
Hard scraper is utilized in the building of gold foil paper, leading to surface harm or scratch of gold foil, which is recognised incorrectly as quality problem.
Tip: construction equipment ought to be selected for different components and different parts.
During the building of the Classic Wallcoverings precious metal foil paper, the white paste is mistakenly contaminated with the top of gold foil, causing the gold film to reduce its luster (the white paste will form a mist film upon the top of precious metal film and cannot be wiped), which is mistaken for quality problems.
Suggestion: gold foil is beautiful, but she’s also scared of glue.
Following the metope brushed varnish, didn’t wait for varnish to dry fully after that paste wallpaper, cause varnish by bottom paper infiltration surface paste, produce chemical reaction, form similar to the protruding granule of measles shape, blunder is a quality problem;
Clew: metope does not dry building but big avoid
After wallpaper is pasted, open a window immediately ventilated, bring about wallpaper dry shrink as well fast, form juncture is apparent, mistake is quality problem;
Tip: end up being gradual and don’t be impatient.
Because wall seeps water, provide about wallpaper to paste over time of time, begin by bottom paper mildew, the secretion of mould and paste make chemical reaction, bring about wallpaper surface area large area discoloration, appear red place or blue place, and mistake is quality issue.
Due to the need for warm and humid environment for mold development, this kind of situation often occurs in rainy and high-temperature months, which generally occurs first in the internal part of the wall with discharge pipes or close to eaves and Home windows.
Tip: it is crucial to protect the wall structure from wetness, especially the wallpaper base paper manufactured from pure paper and non-woven cloth should be waterproof.