Your house decoration process is numerous, and the detail is definitely very much. Wallpaper building is the final method that the house decorates hard outfit, soft costume begins. The wallpaper should certainly be inside the carpentry, fresh paint, water and electricity, filling all hardware finish, and have been cleaned after one time.
1. Flooring and skirting are installed
❖ avoid play keel, saw wood flooring and so on make the wallpaper.
❖ to prevent shock when install the line that play a base, wallpaper and metope separation, thus appeared the wallpaper bubbling, become warped edge phenomenon.
❖ in order to avoid cutting the line that play a base the moment large amounts of airborne dirt and dust pollution and wallpaper bruised.
❖ general putty can be not batch to the base bottom, first wallpaper cannot cut neatly, at risk of turn into warped edge, using a long time lead to the wallpaper into the coils.
❖ in order to avoid the brand that play a base meant for glass glue wallpaper seal off up, unable to produce the wall of the water molecules emissions, lead to the line that play a base site wallpaper mildew.
❖ play crural line, likely wall structure and play crural series straightness is not enough or have crack, the wallpaper has a cover up aperture effect.
2 cover and door are mounted
❖ install door initial, can stay away from the wallpaper damaged and getting dirty, as well facilitate the repair of paint. Paint mending (gaps in door covers and wall surfaces, and stopping lines) will stain the wallpaper if applied properly.
❖ door size could have a discrepancy, in the event small size, wallpaper, primary door will appear empty phenomenon; If fully pasted, it is easy to pull the wallpaper once installing the door, leading to problems for the wallpaper.
Real wood paint can not always be finished with wallpaper, after making wood paint
❖ because carpentry paint once construction, atomization, the color will stick on the wallpaper. And when fresh paint construction, want to take on protecting to finished product, especially the periphery metope such as cabinet, door, partition should stick safety film, if atomize to metope, to the engineering quality of wallpaper is usually not assured, give a problem very easily.
several. Air conditioning holes
❖ avoid wallpaper damage of drilling hole.
❖ prevent wall vibrations cause the wallpaper off when punching.
❖ to avoid airborne dirt and dust pollution when punching wallpaper.
The holes of the curtain Classic Wall paper hanging rod have been made in advance
The position of curtain hanger rod support is very well designed and holes happen to be made to avoid damaging the wallpaper surface with late punching. In particular, flocking, silk, deep pressure, special materials such since some difficult to do wallpaper, just before paste must be made in advance to hang the curtain rod holes.
How to paste the wallpaper
Remove the wall skin: remove the original paint and different objects within the wall, work with gypsum powder to fix the cracked areas of the wall, and apply the bandage after leveling; Whenever the sand and dull walls, partition walls, yet also paste glass textile or cloth netting; Some of the poor quality partitioning or external walls to reach the insulation result, need to be full of nail plasterboard.
Trim wallpaper: measure metope elevation first, cut wallpaper length again, have two sorts of circumstance: do not really add cut 5 to 8 centimeters by metope height according to metope height left and right sides span, use as up and down repair edge: to spend wallpaper needs to consider the symmetry of design and style, reason cut length should certainly increase according to real circumstance, can lengthen main to 10 centimeters commonly.
Coating adhesive solution: picture glue solution with covering around the back of reducing good wallpaper brush, pay special attention fully glue around the edge to liquid, in order to ensure the construction quality, pasted wall paper and stuff in the face of folding place 5-10 short minutes (attention, nor the external force, in order to avoid wallpaper in crimp, especially it’s ok cloth) completely through the glue liquid into the lower part of the paper can be posted, besmear brushs number of wallpapers, just about every time and to post.
Wall structure paper construction: it is to be in frequently door edge or hue Angle from go straight down to paste first wall structure paper, by scraping table from go down, simply by introversion outside, blow conventional paper paper gently, extrude bubble and superfluous glue water, make wall paper is definitely even close to metope.
Before pasting wallpaper, closed off power supply: when pasting wallpaper, if encounter the place that has power switch or socket on metope, can turn off total power first, cover wall paper next all power supply and socket, slice two diagonals from middle of gravity point, may show 4 small triangle, reoccupy art tool takes away all round redundant wallpaper.
Trim cleaning: cut away the additional wallpaper at the two ends of the top and lower ends, and make the blade well-defined to avoid rough edges. Dip in water with cloth or sponge to wipe the stuff liquid that remains on the wall paper surface area completely clean, lest wall membrane paper becomes yellow, following wall paper is dry out, if find a bubble in the surface, cut available with the knife try out glue liquid again press flat can eliminate (with needle tube better)